In this example, the nearest airport is at the 4 o’clock position at a distance of 6.6 nm. The directions are shown with respect to the current heading. ALTITUDE HOLD (ALT) Hold a constant altitude. The color of the tape shows the airspeeds for the current aircraft: – green represents normal range – white representsairspeed range with flaps extended – yellow representsoperation in smooth air without abrupt control inputs – red represents below stall speed at the low end above velocity and never exceeds (‘red line’) at the high end The ground speed is displayed at the bottom. Latest Aerofly FS 2 … At the top right corner of the next screen, click on the symbol that looks like a target. When engaged, the autopilot will climb / descend to the target altitude and level off. Again, the magenta trend indicator shows what the altitude will be in 6 seconds at the current rate of climb. The magenta trend indicator bar shows what the heading will be in 6 seconds at the current rate of turn. Q: Sound on/off You can add any waypoint worldwide like shown in 3.2. If you want to use separate rudder pedals please proceed as follows: If you have any problem in programming the buttons or axis on your USB device then please click on the displayed USB device button at the “Primary” menu. In the PC version you can program and control the camera perspective via shortkeys. To use the Steam version of aerofly FS2 you need to install the “Steam client” first. Open “Library” / “Games” and click on Aerofly FS 2 . The magenta trend indicator shows what the airspeed will be in 6 seconds. Follow this link to manage your iTunes credit :https://www.apple.com/de/support/itunes/cards-codes/. If you see all USB devices at the bottom, start programing the single functions: Click the throttle function and move the throttle on the joystick to full power, Click the elevator (aileron) function and move the joystick down (right), Click the rudder function and move the rudder pedals to the right, Open the folder to see both wheel brakes (left and right), Click the left (right) wheel brake and push the left (right) brake. Under navigation you can select airports and navaids worldwide. When the target altitude is changed by tapping the + / – buttons below the altitude indicator, the autopilot will initiate a climb / descent to the new altitude. Reach out to the lever you want to operate. Once you have the throttle lever, you can push forward or pull back to adjust. If you want to select the mode manually you can do this by launching the program via the steam client: Open the sound settings by swiping up from the bottom of the screen of your device. The height above ground is shown at the bottom. More aircraft (In-Apps) can be purchased directly from the carousel selection. Two axis stabilisation (ROL + ALT) The easiest way to use the autopilot is the ROL/ALT mode. the rudder to the right or the throttle to maximum, Control your settings by the moving the white bar, If you want to delete a setting click once again on the mid bar and press “Delete” on your keyboard. add the heading mode by clicking on “HDG”. for the camera selection. You control your plane by using the following natural gestures. If a descent would be required to reach the new altitude and the last selected vertical speed was a climb at 1000 ft/min, this would be changed to a default of -1500 ft/min and vice versa. We soon noticed that this is just not an option for the mobile version because the PC version is already giving novice users a headache. Please note that many functions need two buttons or keys to increase or decrease, Plug in the joystick and pedals directly to two different USB plugs at your computer, If you want to use a USB hub please use an active one with your own power supply, Wait until windows has installed the USB driver for any USB devices you want to use, Start aerofly FS2 and open “Settings” / “Control” (image). Buying new sceneries (Mobile version) Reach out to the throttle lever, but make sure you are lined up between the throttle levers. As we are still getting used to the Lynx, we decided to take a look at the city of lights. Immediately after selecting your destination all runways will appear as a list. Note that once you lock on to the knob, you can move your hand away and still be able to twist the knob. Graphics settings (PC version) If a former route is displayed then simply click on “Clear Route” to delete the old one. At the end of each lesson you can get up to 3 stars. The next 5 lines will be enabled. Aerofly FS2 is not exactly a sim where a lot happens but the last weeks has brought us a new helicopter and a new scenery (both from third-party developers). The distances are displayed in nautical miles. Technically you can control the pedals with the touch controller, however you have to use the left thumb sticks to do this. Select location Immediately thereafter you can fly the aircraft. A good close look at Aeroflys newest feature. Then confirm the In-App purchase. The panel lights and instrument lights can be programmed under “Settings” / “Control” / “Lights”. 9. Two white and two red markers indicate a correct approach. These limits are exceeded for example if you fly a looping with heading mode engaged – the autopilot will disengage as soon as the nose is 45 degrees above the horizon. Runway lighting and Approach guides If a target altitude is selected, this will be displayed in magenta at the top and the altitude bug will be shown. Make a pointed finger by squeezing the middle finger (trigger) and the ‘A’ button. However, when they recently developed and released their VR Hands in early 2018, many users once again took to the skies from the Aerofly FS 2 hangar. By this way you can control the course via the “HDG” select knob (2.4) and climb rate via the “UP” or “DN” buttons. “Regions” is only used for purchasing new sceneries or restoring after an update. This example shows a very weak wind from the left. A bar having a length equivalent to 100 ft therefore indicates a rate of climb of 1000 ft/min. Open the menu “Other Settings” via the main menu and settings. Transparency: With increasing transparency the control elements are weaker. WING LEVELER (ROL) In this mode the autopilot will engage in the basic roll (ROL) mode which functions as a wing leveler. You also can use the normal volume controller. You can check the download progress under “Updates”. In the next few weeks some different updates will be improve the autopilot functions. Once the knob is set where you want it, let go by releasing the ‘A’ button and pointer finger (trigger button). Press the button on the joystick or keyboard for the functions you wish to program. Mar 30, 2019 @ 3:23pm VR view I am playing in VR using a rift. Heading and vertical speeds can be changed using the +/- buttons. By turning on “invert” the camera control will move upwards instead of downwards. By this way the autopilot will be target the presetted height and will hold the flight level automatically. Then follow the instructions to move and center the sticks and throttle slider. For a smooth experience you will need an actual graphics card driver. The v/s mode will override the altitude mode, so this can be used to leave an altitude that was previously held constant by the autopilot. So we created the copilot which is nothing else than a highly sophisticated user interface for the autopilot in the airplane. If the aircraft has to climb to get to the selected altitude, the copilot will either climb with a constant vertical speed or climb by maintaining the selected airspeed, depending on the aircraft type and autopilot. Sound settings (Mobile version) After that you can choose your destination from a list. Type in your password to login into your iTunes account. To reset this settings simply click on one of the preset setups at the line “Graphics quality”. Click “I” to display the virtual cockpit at the top of the screen for a easy check of presetted course. If you ever have an issue in terms of graphics, please check your graphics card driver. 18. (10) Nearests airports Shows the distance of and direction to the two nearests airports. 16. From now you can change the flight level by presetting a new high and click on “up” or “down” once again. To use the Steam version of Aerofly FS 2 you have to install the “Steam client” first. 6. Select “Settings / Control / View” in the main menu. If the aircraft cannot climb at the selected vertical speed, it will loose airspeed until the autopilot disengages at minimum speed. The target airspeed is shown in magenta at the virtual cockpit and can be changed by individually programmed buttons or keys. You can`t program axes or buttons via this interface but check the function. Open the graphics settings from the main menu by clicking on “Settings” and “Graphics”. But Requires (Lots Of) Practice! Very Good! Your email address will not be published. Setup of your Physical Controls is simple and can be easily added in the Control Settings as shown above. I: Display Flight info (virtual cockpit) After logging in a confirmation of the purchase is needed. M: Display Moving Map 1 to 6: Different camera views (retype any of these keys for more camera views), Z and Shift+Z: Camera Zoom in/out 3. For a standard turn rate of 180 degrees per minute, the trend indicator has a length equivalent to 18 degrees. Tap the altitude indicator to activate this mode. Click left in the smaller fields at the function you want to program. Adjust the flight direction by rotating the course indicator with the mouse. (2) Flap indicator Shows the actual flap position in degree, (3) Power indicator Shows the actual engine output in percentage. On the other hand, if the altitude mode is active, the vertical speed mode will disengage 500 ft before reaching the target altitude to allow levelling off and avoid crossing a selected altitude. While I was experimenting with Aerofly FS 2 in VR, I noticed that you can easily adjust the trim wheel. 5. The navigation is in union with the autopilot to form a fascinating chapter in Aerofly FS 2. General settings Aerofly FS 2 is a next generation flight simulator open for add-ons and sets a high value on realistic flight physics, highly detailed aircraft and a stunning, photo realistic scenery. Go to the controls menu. Go to the main menu and open the map by clicking on “location”. Here you can enable or disable your USB device and double check all axes and buttons. Now you can set up the texture quality or building density individually. An In-App scenery must not be selected after purchasing. Approach guides: Displays the green boxes as approach guides. AIRSPEED (SPD) The airspeed mode / auto-throttle will adjust the engine power to keep the selected airspeed. If you want to select the mode manually you can do this by launching the program via the steam client: Start the Steam client. Per default “vsync” is on. An installation of an In-App scenery needs enough free storage on your device. Saitek Pro Yoke which comes with a throttle quadrant, Integration of Flight Controls into VR Flight. 20. Doublecheck your prepaid credit on your iTunes account at first. Follow the displayed instructions to move e.g. The vertical speed (VS) mode allows variable vertical speed climbs and descents. At the “Location” menu the orientation is purely geographical. The lessons can be repeated individually. The download starts immediately after payment receipt. After that you`ll see this interface. Starting as a greenhorn you will be trained by a female flight instructor. 15. Now adjust the trim. Aerofly FS 2 Flight Simulator. Delete a setting by clicking on the line and “Delete” on the keyboard, To reset all settings click on the joystick icon at the top right and confirm. In this window you can see your current position and all airports in the actual map section. Do add a VOR or any position as a waypoint by clicking left on a VOR icon or anywhere on the map and then click on “+” to insert. This mode can help in case you encounter certain graphics card issues. Open the “Library” / “Games” and right click on Aerofly FS 2. You can set up the update preferences via this client. The Yoke will now move in the direction you move your hand. Page up/down: Head position up/down 13. This mode can be selected by tapping the vertical speed indicator. Aircraft that are not purchased appear slightly darker in addition with a green price button. The green approach guides can be activated via the main menu under Settings. The target heading can be changed while the heading mode is engaged, the autopilot will then turn the aircraft to the selected heading. If you want to have more insight you can agree to the beta status via your Steam Client. Aerofly FS 2 detects 3D glasses automatically. Flight route (PC version) The new version of the computer pilot will use the aircraft’s autopilot if available, so that the selected values displayed in the cockpit are in sync with the copilot’s settings. You can change the orientation or frame size via the two icons at the bottom of the map. Flight information: By clicking on “show” you can display the virtual cockpit at the top of the screen. The displayed route will be actual after any change. Now the aircraft will be stabilized automatically. Any In-App map will be displayed directly in “Location”. Right click on “Aerofly FS2 Flight Simulator” and select “Properties”, Select the “Updates” tab and choose “Always keep this game up to date”, Right click on “Aerofly FS 2 Flight Simulator” and select “Properties”, Click the DLC tab and check for an available update, Open “Library” / “Games” and right click on, Open “properties” to see the window shown on the right, Select the tab “Betas” and opt for the beta status. Intel Core i7 8700K @ 5.0GHz / 32.0GB G.SKILL TridentZ Series Dual-Channel Ram / ZOTAC GAMING GeForce® RTX 2080 Ti Triple Fan / Sound Blaster Z / Oculus Rift VR Headset / Klipsch® Promedia 2.1 Computer Speakers / ASUS ROG SWIFT PG279Q ‑ 27" IPS LED Monitor ‑ QHD / 2x Samsung SSD 850 EVO 500GB / 1x Samsung SSD 860 EVO 1000GB / 5 … In this case proceed as follows: Under navigation you can select airports and navaids worldwide. 17. The target heading can be changed by tapping the + / – buttons below the heading indicator. Now, you can scale the window size up to your full monitor size. If you want more about the Integration of physical controls into VR Flight simulation, take a look at my post. move your hand to the rocker switch and physically move your finger onto the rocker switch as if you were operating it in a real plane. If you do this, you can go back to the main menu by using the “ESC” key. Use the extra buttons to filter VORs or center your position on the map. Coding on/off: STRG+F2. From this point on you have to perform the landing manually. When ALT is enabled, the autopilot is set up to fly to the selected altitude. The copilot will either fly manually or configure the aircraft’s autopilot to follow the route and climb and descend accordingly. squeeze your pointer finger (trigger button) and click the ‘A’ Button at the same time. Touching these buttons for a longer time will repeatedly change the selected heading by 5 degrees. At the bottom of the new window you`ll find the recognized and usable USB-Joysticks. Getting beta tester (Steam). The autopilot can stabilize the heading, airspeed, altitude as well as the vertical speed. Open the general settings from the main menu by clicking on “Settings” and “General”. Press the ROUTE button when close to the green navigation route to follow this route. You can update your Aerofly FS 2 for free or you can buy extra “Downloadable Content” (DLC) via this client. 2. To add more airfields select “Regions” from the main menu and buy the available landscape as In-App via your iTunes account. If you have any trouble obtaining a smooth performance you can limit the frame rate. Use the red “x” icon to delete a waypoint from your route. The lowest is 120 FPS. Move the Lever in the direction you need. The copilot will disengage the autopilot or stop controlling the airplane 0.2 NM before the destination runway threshold. (8) Altimeter Shows the current altitude above sea level in feet. Open “Settings” in the main menu and choose “Control” in the submenu. (5) Airspeed indicator Shows the IAS (indicated airspeed) in knots. Aerofly FS 2 is a next generation flight simulator open for add-ons and sets a high value on realistic flight physics, highly detailed aircraft and a stunning, photo realistic scenery. If you want rudder controls, I definitely recommend the. Please disable any monitor zoom functions and set up the monitor resolution using this selection: If you have a special resolution or encounter issue with a low frame rate then please use the “Window mode”. The map can be zoomed in or out with the mouse wheel. The selected altitude can be changed while ALT is active. RC7 User models and SceneriesLandschaften, support page for Steam HTC with solutions. Click on “Play”. AeroFly FS2 in VR Questions I'm researching which flight sim I'd like to get first for my new Rift. 14. Click on the line you want to program and press a button on the joystick or a “key” on the keyboard. 10. View / zoom (PC version) At the bottom left corner of the screen, click on your device shown in the box. This mode is perfect for cruise flight at a constant altitude. Click at the autopilot panel on “AP” to activate the autopilot, Click on “HDG” right beside to activate the Heading Mode. At the beginning it is recommended only to use only one of this possibilities. The map can be moved and zoomed in or out worldwide. Computer Pilot / Copilot (Mobile version) For autopilot operation, the target rate of climb is shown at the top. A left click anywhere on the map places an aircraft at the altitude which you can selcet from the bar on the right. zippyandgeorge. I used to fly a pay ware medical helicopter in x-plane 10 with track IR back in the day, but always wanted to fly in VR. 17. Use the graphics settings to optimize the flight simulator performance on your PC. We will shop the basic navigation in the paragraphs below. Buying new sceneries (PC version) The runway lighting turns on automatically by setting it in daylight settings. move your hand to the switch, put your finger under or over, Flick the switch as if you would in real life, Unfortunately without physical pedals, this is a difficult one to control. Using both is only recommended for advanced users. FPS display: STRG+F1 The problem comes when you want to adjust the trim wheel for the purpose it is there for. This way, you will get updates with features that are still in progress. If you want to see a preview, please open this site. At the same time, Aerofly FS 2 features an intuitive user interface and requires virtually no training time. The ‘A’ button sits naturally under your thumb. If you did this correct, you should have the yoke in your hand. Log in. The map can be zoomed in/out with the mouse wheel and swiped to display more airfields. The map can be moved and zoomed in or out. E.g. Imagine holding your hand out in position for the yoke. The box around the heading will change its color to green to indicate the heading is controlled by the autopilot. HEADING HOLD (HDG) The heading hold mode can be activated and deactivated by tapping on the heading indicator. Autopilot (PC version) Fly a large selection of highly detailed aircraft with fully animated and interactive 3D cockpits. If you continue to use this site we will assume that you are happy with it. Flight informations No, I prefer to use a combination of physical controls and VR controls. (1) Wind Shows the current windspeed and direction with respect to the aircraft’s orientation. This slider allows the user to set the reset time after a crash. You also will see “HDG” at the panels display. World wide coverage of elevation data and aerial images is included with Aerofly FS 2. The vertical speed for this will be the last selected vertical speed, provided it has the right direction. The vertical speed in this phase can be selected by using the + / – buttons below the vertical speed indicator . Reach out to the knob you want to operate, Twist your hand as if you were turning the knob. Go to the main menu and open the map by clicking on “location”. To enable the individual graphics settings click on “custom” at the first line. Do I recommend using VR controls only? How to Control your View and Menus. The heading bug (the magenta symbol above the ‘W’ in this example) and magenta number to the left are displayed if a heading for autopilot operation is selected (see below). General info and short keys It is recommended to have 4 to 5 GB of free storage for a smoother performance on the device. Engaging the copilot will enable the autopilot and set it to the current heading and vertical speed. Descents are always done by maintaining a vertical speed. P: Pause/Play A: Autopilot’ 19. As we steadily improve the depth system of all airplanes in Aerofly FS 2, we noticed that it was getting a lot more difficult to operate the autopilot in most airplanes as we are simulating them ‘almost’ like their real counterparts. You also can use “Shift + Key” as a shortkey! When engaged, the autopilot will try to climb / descend at the selected vertical speed. Using your Aerofly FS 2 VR controls can sometimes be a frustrating process if you don’t know how to use them. 7. Aerofly FS 2's VR has improved a lot since I last tried it, that's for sure. Click on “Play”. Launching Aerofly FS2 in VR-Mode (PC version) Aerofly FS 2 detec ts 3D glasses automatically. If no heading was selected so far, the current heading will be selected and shown in magenta. Once you have the throttle levers, you can push forward or pull back to adjust. The autopilot cannot be switched on and will disengage when one of the following limits is exceeded: bank angle larger than 60 degrees, pitch angle larger than 45 degrees, airspeed less than 1.2 times the stall speed or when the aircraft is on the ground. Please note that you can control the autopilot by two different ways. Please use the “Restore Purchases” button for this step. T and Shift+T: Time settings (Day/Night) Basic settings joystick (PC version) Vertical speed (V/S) Climb / descend at a constant rate. Per default you also can hide and display the flight information by pressing key “I”. Open the “Library” / “Games” and right click on Aerofly FS 2. To plan a new route open the “Navigation” dialog in the main menu. Click left in the mid field of the function you want to program the joystick. Arrow keys up/down/left/right: Camera view I found it was very difficult to use.